imaging linked to wear pattern analysis, with source literature and related extracted records kept visible.
100%
Confidence
17
Literature sources
32
Linked simulants
281
Linked properties
Measurement type
imaging
Application
wear pattern analysis
Primary source
Wear investigation of PTFE, PEEK and UHMWPE-based reciprocating shaft seal materials with lunar/Martian regolith simulants
Review state
needs review
The finer lunar simulant is able to enter the contact area more easily than the Martian simulant. The hard counterface allows for less groove formation on the counterface itself, but results in more
Quantifying the 3-dimensional shape of lunar regolith particles using X-Ray computed tomography and scanning Electron microscopy at sub- resolution
Improve CS from 21.9 to 312.2 MPa [125]
se of this research is thus to get insights into the particle shape and analyze their geometric properties in 3D space. In this work, micro X-ray computed tomography (micro-CT)-based reconstruction...
highland material, as well as the differences due to sample maturity. All samples were sintered with incrementally increasing temperatures; x-ray computed tomography examination of the pellet inter...
ased, leading to higher density and lower porosity in the sintered product. Microstructural analysis using scanning electron microscopy and X-ray computed tomography confirmed that porosity decreas...
.5.1 Particle size distribution (PSD) 2.5.2 X-ray diffraction (XRD) analysis 2.5.3 X-ray fluorescence (XRF) analysis 2.5.4 Microscopy 2.5.5 X-ray computed tomography (XCT) analysis 2.5.6 Microhardn...
Three-dimensional tomographic images of cross sections in all directions of samples with different scanning strategies
C. Zhou, Y. Gao, Y. Zhou, W. She, Y. Shi, L. Ding, C. Miao | 2024 | Engineering
DOI 10.1016/j.eng.2023.11.019B. Peng, R. Hay, K. Celik | 2023 | Powder Technology
DOI 10.1016/j.powtec.2023.118621B. A. Lomax, G. Charpentier, A. Nizet, A. Rützler, A. Kahan, F. McDonald, R. Lindner, J. D. Carpenter | 2025 | Materials Today Advances
DOI 10.1016/j.mtadv.2025.100620Y.-J. Kim, H. Jin, L. Zhuang, S. Yeom, J. Lee, H.-S. Shin | 2025 | Case Studies in Construction Materials
DOI 10.1016/j.cscm.2025.e05449A. Lucena, N. Ranjbar, S. Khademzadeh, M. Bayat | 2025 | Materials & Design
DOI 10.1016/j.matdes.2025.114605F. Dang, J. Zhu, M. Ke, Z. Wang, S. Wen, Y. Zhou, C. Zhou, L. Ding | 2026 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.200283C. Wang, S. Sanlang, X. Tong, K. Xu, L. Han, H. Xie, Y. Feng, X. Xu, Y. Jin | 2025 | Icarus
DOI 10.1016/j.icarus.2025.116764G. Xue, G. Qiao | 2025 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2025.141355A. Dust, Y. Liu, L. A. Taylor | 2011 | Planetary and Space Science
DOI 10.1016/j.pss.2010.11.007J. Keuntje, T. Griemsmann, J. Patzwald, R. Staehr, P. Jaeschke, E. Stoll, S. Kaierle, L. Overmeyer | 2024 | Procedia CIRP
DOI 10.1016/j.procir.2024.08.131E. Facility, U. Oxfordshire, E. Team, U. Bay, E. Computing, U. Pontypridd, U. Cornwall, I. Pelton, I. Toklu, C. Zhang, P. Cafaro, I. Bari | 2024 | Frontiers in Space Technologies
DOI 10.3389/frspt.2024.1510635H. Jin, J. Lee, L. Zhuang, S. Yeom, H.-S. Shin, Y.-J. Kim | 2024 | Journal of Building Engineering
DOI 10.1016/j.jobe.2024.109193Y. Yang, M. Rahman, M. Andriamasinoro, F. Vatteroni, L. Wang | 2026 | Acta Astronautica
DOI 10.1016/j.actaastro.2026.04.066G.-E. Battsengel, N. Melkoumian, D. Harvey, R. Akmeliawati | 2026 | Geosciences
DOI 10.3390/geosciences16060219W. Sun, F. Dang, L. Ding | 2025 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.200225100%
17 sources