Geotechnical characterization linked to Mobility and excavation, with source literature and related extracted records kept visible.
74%
Confidence
24
Literature sources
37
Linked simulants
315
Linked properties
Measurement type
Geotechnical characterization
Application
Mobility and excavation
Primary source
FEM and Experimental Analysis of Lunar Soil Excavation Test
Review state
needs review
distribution of TJ-1 simulant is presented in Fig. 3, while Fig. 4 provides the stress-strain relationships of TJ-1 simulant obtained from triaxial compressiontests. The measured peak internal fric...
incorporated into the three-dimensional (3D) micromechanical contact model. Additionally, a flexible boundary condition was employed in the triaxial simulation to ensure the evolution of strain loc...
C-1) and its various geomechanical properties such as cohesive modulus of deformation, frictional modulus of deformation, sinkage exponent, cohesion stress, angle of internal friction, shear deform...
this study explains the dynamic properties of the new lunar highland simulant LSS-ISAC-1 under simulated moonquake conditions using cyclic triaxial tests. The shear modulus and damping ratio were d...
RENTLUNARDUSTMITIGATIONTECHNIQUESFUTUREDIRECTIONS ZANON P 1 Introduction 2 Dust and its characterisation 2.1 Composition 2.1.1 Adhesion and cohesion an overview 2.2 Mission impacts and future conce...
d multiple-output least squares support vector machine (LS_SVM) to map engineering data and predict the terrain-shearing parameters such as cohesion, internal friction angle and shear deformation m...
ose a framework for developing a lunar regolith simulant that closely resembles the regolith at the CE-5 landing site. Firstly, the in-situ internal friction angle of the lunar regolith where CE-5...
equipment, against vibrational distur- bances such as moonquakes and meteorite collisions. Therefore, in this study, the static and cyclic triaxial compression tests of the regolith simulant were c...
I. Venugopal, K. Muthukkumaran, M. Annadurai, T. Prabu, S. Anbazhagan, I. Bangalore | 2020 | Advances in Space Research
DOI 10.1016/j.asr.2020.08.021T. Prabu, K. Muthukkumaran, I. Venugopal | 2022 | Soil Dynamics and Earthquake Engineering
DOI 10.1016/j.soildyn.2022.107178P. Zanon, M. Dunn, G. Brooks | 2023 | Acta Astronautica
DOI 10.1016/j.actaastro.2023.09.031L. Xue, J. Li, M. Zou, W. Zong, H. Huang | 2016 | Aerospace Science and Technology
DOI 10.1016/j.ast.2016.03.018C. Wang, S. Sanlang, X. Tong, K. Xu, L. Han, H. Xie, Y. Feng, X. Xu, Y. Jin | 2025 | Icarus
DOI 10.1016/j.icarus.2025.116764Y. Miyamoto, T. Nakano, T. Kobayashi | 2024 | Open Journal of Earthquake Research
DOI 10.4236/ojer.2024.131002S. Wang, M. Jiang, J. Lin | 2025 | Advances in Space Research
DOI 10.1016/j.asr.2024.10.048F. Wylęgała, T. Uhl | 2026 | Acta Astronautica
DOI 10.1016/j.actaastro.2025.11.007J. Q. Li, R. Y. Shi, M. Zou, L. He, Y. J. Yang, H. Li | 2012 | Applied Mechanics and Materials
DOI 10.4028/www.scientific.net/amm.204-208.479Authors pending | 2013 | Archives of Mining Sciences
DOI 10.2478/amsc-2013-0037Authors pending | 2026 | Acta Societatis Metheoriticae Polonorum
DOI 10.65362/asmp.17.3828V. S. Engelschiøn, S. R. Eriksson, A. Cowley, M. Fateri, A. Meurisse, U. Kueppers, M. Sperl | 2020 | Scientific Reports
DOI 10.1038/s41598-020-62312-4H. A. Oravec, X. Zeng, V. M. Asnani | 2010 | Journal of Terramechanics
DOI 10.1016/j.jterra.2010.04.006Y. Yang, M. Rahman, M. Andriamasinoro, F. Vatteroni, L. Wang | 2026 | Acta Astronautica
DOI 10.1016/j.actaastro.2026.04.066S. Province, W. Engineering, X. Engineering, T. Engineering | 2018 | Stavební obzor - Civil Engineering Journal
DOI 10.14311/cej.2018.02.0017P. Jayalekshmi, T. Tiruchirappalli, I. Nadu | 2018 | Journal of Theoretical and Applied Mechanics
DOI 10.15632/jtam-pl.56.1.137L. Windisch, S. Linke, M. Jütte, J. Baasch, A. Kwade, E. Stoll, C. Schilde | 2022 | Materials
DOI 10.3390/ma15238561G.-E. Battsengel, N. Melkoumian, D. Harvey, R. Akmeliawati | 2026 | Geosciences
DOI 10.3390/geosciences16060219S. Basel, S. Engineering, H. System, N. Street, H. District, N. China, S. Road, F. District | 2022 | Machines
DOI 10.3390/machines10070593G. Zanotti, I. Troisi, A. Dottori, M. R. Lavagna | 2024 | Aerospace
DOI 10.3390/aerospace11040295Q. Li, J. Li, J. Jiang | 2025 | iScience
DOI 10.1016/j.isci.2025.114075W. Sun, F. Dang, L. Ding | 2025 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.20022574%
24 sources