thermal linked to Experiment, with source literature and related extracted records kept visible.
100%
Confidence
28
Literature sources
45
Linked simulants
444
Linked properties
Measurement type
thermal
Application
Experiment
Primary source
A novel approach to increase flowability of planetary regolith: Spray drying of Martian simulants for powder-based ISRU fabrication
Review state
needs review
Thermogravimetry (TG, Netzsch STA409PC) coupling mass spectrometry (MS, Pfeiffer Omnistar) measurement was conducted to investigate the nature and content of the volatile compounds generated by spray
Based on the data obtained from the DSC thermogram, the Trg value for the BSB LRS glass system was determined to be 0.50.
As noted in the DSC thermogram, the decrease in augite content in the sample at 1100 C, can be due to its melting [44 ].
The coefficient of friction also increased significantly in PEEK-on-PEEK tests, as discussed later in section 3.2, indicating a pronounced adhesive bond between a tribo-pair of the same material,
The prior reduction procedure lowers the onset of melting by 19 C and apparent liquidus by 50 C.
Improve CS from 2653 to 7809 psi (1 psi = 6894.757 Pa) [116]
lant. 4 Characterization of NEU Mars-1 Particle size, elemental and chemical composition, phase, microscopic morphology, thermal stability (DSC-TG), Mossbauer spectroscopy, and dielectric property...
the average energy depositions in silicon solid state detectors as a function of depth analogous to a depth dose distribution were measured for a particular beam passing through one type of simulant.
Á. Kalácska, V. Parmentier, P. Baets, G. Kalácska, U. Peek | 2025 | Wear
DOI 10.1016/j.wear.2025.205791J. Sutherland, K.-U. Hess, T. Bissbort, S. Stapperfend, A. Müller, T. C. Hansen, A. Rack, D. B. Dingwell | 2025 | Chemical Geology
DOI 10.1016/j.chemgeo.2025.123115C. Zhou, Y. Gao, Y. Zhou, W. She, Y. Shi, L. Ding, C. Miao | 2024 | Engineering
DOI 10.1016/j.eng.2023.11.019J.-Z. Guan, A.-M. Liu, K.-Y. Xie, Z.-N. Shi, B. Kubikova, I. Wulanchabu, C. Mongolia | 2020 | Transactions of Nonferrous Metals Society of China
DOI 10.1016/s1003-6326(19)65193-9J. Miller, L. Taylor, C. Zeitlin, L. Heilbronn, S. Guetersloh, M. DiGiuseppe, Y. Iwata, T. Murakami | 2009 | Radiation Measurements
DOI 10.1016/j.radmeas.2009.01.010N. Gupta, V. Dawara, A. Kumar, K. Viswanathan | 2024 | Advances in Space Research
DOI 10.1016/j.asr.2024.05.024M. Molla, C. Ng, T. Tafsirojjaman, S. T. Smith | 2026 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2026.145564S. Rahman, S. Akin | 2026 | Surfaces and Interfaces
DOI 10.1016/j.surfin.2025.108224F. Dang, J. Zhu, M. Ke, Z. Wang, S. Wen, Y. Zhou, C. Zhou, L. Ding | 2026 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.200283G. Xue, G. Qiao | 2025 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2025.141355G. Xue, G. Qiao, I.-O. Subsequently | 2025 | Cement and Concrete Composites
DOI 10.1016/j.cemconcomp.2024.105840G. Xue, G. Qiao | 2025 | Acta Astronautica
DOI 10.1016/j.actaastro.2025.05.011J. Keuntje, T. Griemsmann, J. Patzwald, R. Staehr, P. Jaeschke, E. Stoll, S. Kaierle, L. Overmeyer | 2024 | Procedia CIRP
DOI 10.1016/j.procir.2024.08.131H. Fisher, J. Patzwald, T. Griemsmann, L. Overmeyer, E. Stoll | 2026 | Advances in Space Research
DOI 10.1016/j.asr.2026.05.036H. Sun, M. Yi, Z. Shen, X. Zhang, S. Ma | 2017 | Planetary and Space Science
DOI 10.1016/j.pss.2017.04.010Y. Liu, X. Zhang, X. Chen, C. Wang, Y. Yu, Y. Jia, W. Yao | 2024 | Crystals
DOI 10.3390/cryst14121022J.-C. Ginés-Palomares, M. Fateri, T. Schubert, L. D. P. d’Ambelle, S. Simon, G. J. G. Gluth, J. Günster, A. Zocca | 2023 | Scientific Reports
DOI 10.1038/s41598-023-50391-yV. S. Engelschiøn, S. R. Eriksson, A. Cowley, M. Fateri, A. Meurisse, U. Kueppers, M. Sperl | 2020 | Scientific Reports
DOI 10.1038/s41598-020-62312-4Y. Suzuki, S. Tanaka, T. Goto | 2025 | Planetary and Space Science
DOI 10.1016/j.pss.2025.106177C. Ray, S. Reis, S. Sen, J. O'Dell | 2010 | Journal of Non-Crystalline Solids
DOI 10.1016/j.jnoncrysol.2010.04.049Y.-J. Kim, B. Ryu, H. Jin, J. Lee, H.-S. Shin | 2021 | Ceramics International
DOI 10.1016/j.ceramint.2021.06.098D. H. Austen, E. Shafirovich | 2024 | Thermochimica Acta
DOI 10.1016/j.tca.2023.179648S. Stapperfend, D. B. Dingwell, K.-U. Hess, J. Sutherland, J. Patzwald, T. Bissbort, D. Müller, M. Eitel, E. Stoll | 2025 | Chemical Geology
DOI 10.1016/j.chemgeo.2025.123082G. Zanotti, I. Troisi, A. Dottori, M. R. Lavagna | 2024 | Aerospace
DOI 10.3390/aerospace11040295W. Sun, F. Dang, L. Ding | 2025 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.200225100%
28 sources