Powder density characterization linked to Benchmarking and comparison, with source literature and related extracted records kept visible.
74%
Confidence
27
Literature sources
47
Linked simulants
368
Linked properties
Measurement type
Powder density characterization
Application
Benchmarking and comparison
Primary source
Preparation and characterization of an S-type asteroid regolith simulant based on the mineral composition of Itokawa particles
Review state
needs review
XRD pattern of SARS-1 exhibits silicate diffraction peaks similar to those of Itokawa with average elemental absolute error of about 2% The bulk density (1.95 0.14 g/cm3) and particle size distribu...
however, other properties differed markedly from those of Martian soil. As compared to Martian soil (1200- 1500 kg/m3) [20,21], JSC Mars-1 bulk density was relatively low (835 kg/m3), the abundance...
nical properties 4.1 Particle morphology 4.2 Particle size distribution 4.3 Atterberg limits & soil classification 4.4 Specific gravity 4.5 Bulk density 4.6 Relative density 4.7 Compaction 4.8 Shea...
eformation, frictional modulus of deformation, sinkage exponent, cohesion stress, angle of internal friction, shear deformation modulus and bulk density. The same were compared with the properties...
ng studies. Cone penetrometer testing (CPT) measurements of LHS-1 reveal a strong exponential correlation between the G slope parameter and bulk density, which allows information to be obtained reg...
n when conducting experiments in atmospheric conditions on Earth. The results of this study show that cohesion increases exponentially with bulk density, while the exponential growth constant is al...
Selection of calibration methods 3 Calibration of characteristic parameters for lunar highland soil simulant 3.1 Moisture conten t P w 3.2 Bulk density and porosity n 3.3 Shear strength G and Poiss...
on of the characteristic parameters of the lunar highland simulant (JLU-H) 2.1 Moisture content 2.2 Particle size distribution of JLU-H 2.3 Bulk density of JLU-H 2.4 Shear modulus and poisson's rat...
I. Venugopal, T. Prabu, K. Muthukkumaran, M. Annadurai | 2020 | Planetary and Space Science
DOI 10.1016/j.pss.2020.105116I. Venugopal, K. Muthukkumaran, M. Annadurai, T. Prabu, S. Anbazhagan, I. Bangalore | 2020 | Advances in Space Research
DOI 10.1016/j.asr.2020.08.021M. P. Lucas, C. R. Neal, J. M. Long-Fox, D. Britt | 2024 | Acta Astronautica
DOI 10.1016/j.actaastro.2024.08.019B. Dotson, D. Valencia, C. Millwater, P. Easter, J. Long-Fox, D. Britt, P. Metzger | 2024 | Icarus
DOI 10.1016/j.icarus.2024.115943X. Sun, R. Zhang, X. Li, M. Zou, H. Zhang | 2026 | Powder Technology
DOI 10.1016/j.powtec.2025.122070X. Sun, R. Zhang, H. Zhang, Z. Hu, W. Wang, M. Zou | 2025 | Advances in Space Research
DOI 10.1016/j.asr.2024.09.031X. Sun, R. Zhang, X. Li, M. Zou, C. Wang, L. Chen | 2022 | Planetary and Space Science
DOI 10.1016/j.pss.2022.105562C. Wang, S. Sanlang, X. Tong, K. Xu, L. Han, H. Xie, Y. Feng, X. Xu, Y. Jin | 2025 | Icarus
DOI 10.1016/j.icarus.2025.116764J.-T. Kim, T.-K. Yeu, Y.-J. Park | 2025 | Advances in Space Research
DOI 10.1016/j.asr.2025.03.024J. Q. Li, R. Y. Shi, M. Zou, L. He, Y. J. Yang, H. Li | 2012 | Applied Mechanics and Materials
DOI 10.4028/www.scientific.net/amm.204-208.479Authors pending | 2013 | Archives of Mining Sciences
DOI 10.2478/amsc-2013-0037Y. Zheng, S. Wang, Z. Ouyang, Y. Zou, J. Liu, C. Li, X. Li, J. Feng | 2009 | Advances in Space Research
DOI 10.1016/j.asr.2008.07.006D. R. Somolinos, B. P. Gallardo, J. C. Estévez, N. Stepanyan, A. Cowley, A. A. Marugán, D. P. Martínez | 2024 | Materials
DOI 10.3390/ma17153633E. Facility, U. Oxfordshire, E. Team, U. Bay, E. Computing, U. Pontypridd, U. Cornwall, I. Pelton, I. Toklu, C. Zhang, P. Cafaro, I. Bari | 2024 | Frontiers in Space Technologies
DOI 10.3389/frspt.2024.1510635W. Han, L. Ding, L. Cai, J. Zhu, H. Luo, T. Tang | 2022 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2022.126655Authors pending | 2026 | Acta Societatis Metheoriticae Polonorum
DOI 10.65362/asmp.17.3828J.-C. Ginés-Palomares, M. Fateri, T. Schubert, L. D. P. d’Ambelle, S. Simon, G. J. G. Gluth, J. Günster, A. Zocca | 2023 | Scientific Reports
DOI 10.1038/s41598-023-50391-yH. Jin, J. Lee, L. Zhuang, S. Yeom, H.-S. Shin, Y.-J. Kim | 2024 | Journal of Building Engineering
DOI 10.1016/j.jobe.2024.109193F. Alberquilla, J. Martínez-Frías, V. García-Baonza, R. Lunar | 2022 | Scientific Reports
DOI 10.1038/s41598-022-20960-8P. Jayalekshmi, T. Tiruchirappalli, I. Nadu | 2018 | Journal of Theoretical and Applied Mechanics
DOI 10.15632/jtam-pl.56.1.137L. Windisch, S. Linke, M. Jütte, J. Baasch, A. Kwade, E. Stoll, C. Schilde | 2022 | Materials
DOI 10.3390/ma15238561G.-E. Battsengel, N. Melkoumian, D. Harvey, R. Akmeliawati | 2026 | Geosciences
DOI 10.3390/geosciences16060219G. Zanotti, I. Troisi, A. Dottori, M. R. Lavagna | 2024 | Aerospace
DOI 10.3390/aerospace11040295Q. Li, J. Li, J. Jiang | 2025 | iScience
DOI 10.1016/j.isci.2025.11407574%
27 sources