Morphology imaging linked to Benchmarking and comparison, with source literature and related extracted records kept visible.
100%
Confidence
46
Literature sources
53
Linked simulants
738
Linked properties
Measurement type
Morphology imaging
Application
Benchmarking and comparison
Primary source
High-yield selective extraction of metal iron from JSC-1A using molten salt electrolysis
Review state
needs review
ition 4.2 Electrolysis investigation of Fe2 O3 reduction 4.3 Effect of different iron oxides in JSC-1A 4.4 Characterization 4.4.1 XRD 4.4.2 SEM and EDS 4.4.3 XRF 4.5 Reduction rate and yield 5 Conc...
e emission spectrum shows the presence of atomic K and Na, hence proving successful thermal reduction and metal extraction. Furthermore, an SEM/EDX analysis of the collection plate to which the ext...
lectrolyses on different cathodic substrates were performed at different conditions and the obtained cathodic products were analysed with a scanning electron microscope (SEM) coupled with an energy...
Quantifying the 3-dimensional shape of lunar regolith particles using X-Ray computed tomography and scanning Electron microscopy at sub- resolution
urrent, which could be attributed to further reduction of metal ions and electrodeposition. An investigation of the electrode surfaces with SEM and EDX after potential controlled electrolysis exper...
ffraction (XRD, MPDDY2094 with Cu K radiation of =1.5405, PANalytical) and Fig. 2 shows its micromorphology and mineral distribution using scanning electron microscopy (SEM, Ultra ZEISS) and energ...
Fig. 5 shows that surface depressions observed via SEM can reach up to 15 m in diameter, whereas the porosity test reveals almost no trend in this size range.
3 Compression performance 3.3.1 Compressive strength 3.3.2 Modulus of elasticity 3.3.3 Failure patterns 3.4 Microstructure morphology 3.4.1 Scanning electron microscopy analysis 3.4.2 Energy disper...
M. Maes, M. Gibilaro, P. Chamelot, C. Chiron, S. Chevrel, P. Pinet, L. Massot, J. Favier | 2024 | Planetary and Space Science
DOI 10.1016/j.pss.2024.105854R. P. Wilkerson, D. L. Rickman, J. R. McElderry, S. R. Walker, K. M. Cannon | 2024 | Icarus
DOI 10.1016/j.icarus.2024.115963S. Rohde, H. Wiltsche, A. Cowley, B. Gollas | 2022 | Planetary and Space Science
DOI 10.1016/j.pss.2022.105534J.-Z. Guan, A.-M. Liu, K.-Y. Xie, Z.-N. Shi, B. Kubikova, I. Wulanchabu, C. Mongolia | 2020 | Transactions of Nonferrous Metals Society of China
DOI 10.1016/s1003-6326(19)65193-9L. Jiang, F. Dang, C. Wang, B. Pan, Y. Zhou, C. Zhou | 2026 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2026.146401R. Shao, C. Wu, J. Li | 2024 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2024.138707I. Venugopal, T. Prabu, K. Muthukkumaran, M. Annadurai | 2020 | Planetary and Space Science
DOI 10.1016/j.pss.2020.105116Y. Yao, C. Liu, H. Liu, X. Chen, X. Li, T. Wang, Y. Wang, W. Zhang, Y. Wu | 2025 | Journal of Building Engineering
DOI 10.1016/j.jobe.2025.112209Y. Yao, C. Liu, W. Zhang, H. Liu, T. Wang, Y. Wu, X. Li, X. Chen | 2024 | Journal of Building Engineering
DOI 10.1016/j.jobe.2024.110709Y. Yao, C. Liu, W. Zhang, H. Liu, C. Zhu | 2024 | Journal of Building Engineering
DOI 10.1016/j.jobe.2024.111162N. Gupta, V. Dawara, A. Kumar, K. Viswanathan | 2024 | Advances in Space Research
DOI 10.1016/j.asr.2024.05.024J. Sorrell, M. Rahman, V. Tsigkis, L. O. Vaught, A. A. Polycarpou | 2026 | Wear
DOI 10.1016/j.wear.2026.206669B. A. Lomax, G. Charpentier, A. Nizet, A. Rützler, A. Kahan, F. McDonald, R. Lindner, J. D. Carpenter | 2025 | Materials Today Advances
DOI 10.1016/j.mtadv.2025.100620Y.-J. Kim, H. Jin, L. Zhuang, S. Yeom, J. Lee, H.-S. Shin | 2025 | Case Studies in Construction Materials
DOI 10.1016/j.cscm.2025.e05449S. Li, X. Li, Y. Gao, B. Zhou, Y. Zhou, J. Song, C. Zhou, W. Yao, L. Ding | 2026 | International Journal of Mining Science and Technology
DOI 10.1016/j.ijmst.2025.11.003C. Wang, S. Sanlang, X. Tong, K. Xu, L. Han, H. Xie, Y. Feng, X. Xu, Y. Jin | 2025 | Icarus
DOI 10.1016/j.icarus.2025.116764G. Xue, G. Qiao | 2025 | Construction and Building Materials
DOI 10.1016/j.conbuildmat.2025.141355G. Xue, G. Qiao, I.-O. Subsequently | 2025 | Cement and Concrete Composites
DOI 10.1016/j.cemconcomp.2024.105840S. Xu, M. Haddad, A. Alamdari, A. Shim, A. A. Luo, S. J. Wolff | 2026 | Acta Astronautica
DOI 10.1016/j.actaastro.2025.11.070S. Zhou, X. Zhu, C. Lu, F. Li, G. Then | 2022 | Chinese Journal of Aeronautics
DOI 10.1016/j.cja.2020.06.014Z. Zhou, X. Zheng, J. Wu | 2025 | Case Studies in Construction Materials
DOI 10.1016/j.cscm.2025.e05417Z. Zhou, S. Li, G. Hu, J. Wu, C. Yao, F. Niu, J. Chen, X.-R. Spectroscopy, T. Diffraction | 2026 | Acta Astronautica
DOI 10.1016/j.actaastro.2025.09.048J.-C. Ginés-Palomares, J. Baasch, S. Stapperfend, L. Facchini, S. Linke, E. Stoll, J. Günster | 2025 | Additive Manufacturing Frontiers
DOI 10.1016/j.amf.2025.200226S. Zhou, C. Lu, X. Zhu, F. Li, F. XRD | 2021 | Engineering
DOI 10.1016/j.eng.2020.10.016Y. Jiang, F. Li, S. Zhou, L. Liu | 2025 | Case Studies in Construction Materials
DOI 10.1016/j.cscm.2024.e04132M. Samouhos, P. Tsakiridis, M. Iskander, M. Taxiarchou, K. Betsis | 2022 | Planetary and Space Science
DOI 10.1016/j.pss.2021.105414W. Lu, Y. Shi, X. Xue, G. Cheng, H. Li | 2026 | Polymers
DOI 10.3390/polym18080998Y. Liu, X. Zhang, X. Chen, C. Wang, Y. Yu, Y. Jia, W. Yao | 2024 | Crystals
DOI 10.3390/cryst14121022E. Facility, U. Oxfordshire, E. Team, U. Bay, E. Computing, U. Pontypridd, U. Cornwall, I. Pelton, I. Toklu, C. Zhang, P. Cafaro, I. Bari | 2024 | Frontiers in Space Technologies
DOI 10.3389/frspt.2024.1510635C. S. Sandeep, V. Marzulli, F. Cafaro, K. Senetakis, T. Pöschel | 2019 | Journal of Geophysical Research: Solid Earth
DOI 10.1029/2019jb017589G. Group, E. Eac, S. Science | 2025 | Fungal Biology and Biotechnology
DOI 10.1186/s40694-025-00201-zJ.-C. Ginés-Palomares, M. Fateri, T. Schubert, L. D. P. d’Ambelle, S. Simon, G. J. G. Gluth, J. Günster, A. Zocca | 2023 | Scientific Reports
DOI 10.1038/s41598-023-50391-yV. S. Engelschiøn, S. R. Eriksson, A. Cowley, M. Fateri, A. Meurisse, U. Kueppers, M. Sperl | 2020 | Scientific Reports
DOI 10.1038/s41598-020-62312-4P. Nieke, J. Kita, M. Häming, R. Moos | 2019 | Materials
DOI 10.3390/ma12030487X. Zhang, M. Khedmati, Y. Kim, H. Shin, J. Lee, Y. Kim, B. Cui | 2019 | Journal of the American Ceramic Society
DOI 10.1111/jace.16808S. Li, Z. Zhou, G. Hu, J. Wu | 2024 | Case Studies in Construction Materials
DOI 10.1016/j.cscm.2024.e03273C. Ray, S. Reis, S. Sen, J. O'Dell | 2010 | Journal of Non-Crystalline Solids
DOI 10.1016/j.jnoncrysol.2010.04.049S. Kaur, A. B. Aleksandrov, W. Ready, T. M. Orlando, P. G. Loutzenhiser | 2024 | Advances in Space Research
DOI 10.1016/j.asr.2024.01.025R. P. Wilkerson, M. P. Petkov, G. E. Voecks, C. S. Lynch, H. S. Shulman, S. Sundaramoorthy, A. Choudhury, D. L. Rickman, M. R. Effinger | 2023 | Icarus
DOI 10.1016/j.icarus.2023.115577Y.-J. Kim, B. Ryu, H. Jin, J. Lee, H.-S. Shin | 2021 | Ceramics International
DOI 10.1016/j.ceramint.2021.06.098F. Alberquilla, J. Martínez-Frías, V. García-Baonza, R. Lunar | 2022 | Scientific Reports
DOI 10.1038/s41598-022-20960-8L. Windisch, S. Linke, M. Jütte, J. Baasch, A. Kwade, E. Stoll, C. Schilde | 2022 | Materials
DOI 10.3390/ma15238561G.-E. Battsengel, N. Melkoumian, D. Harvey, R. Akmeliawati | 2026 | Geosciences
DOI 10.3390/geosciences16060219G. Zanotti, I. Troisi, A. Dottori, M. R. Lavagna | 2024 | Aerospace
DOI 10.3390/aerospace11040295100%
46 sources